Reseña del libro "Sludge Thermal Hydrolysis (en Inglés)"
Thermal hydrolysis is revolutionizing wastewater treatment. Current treatment methods have evolved little since pioneering work in the late 19th and early 20th centuries. Subsequently, most wastewater treatment plants are not designed to meet modern drivers such as energy conservation and nutrient recovery. Additionally, sludge management is expensive and often not viewed in high regard by external stakeholders. By changing the properties of sewage sludge, thermal hydrolysis allows wastewater treatment works to become more efficient, enabling the treatment of greater flowrates to higher standards. Production of renewable energy from sludge is increased, whilst quantity of treated material reduced, which further decreases processing requirements and costs regardless of what they may be. This book, aimed at students and practitioners alike, describes the development of the technology, and highlights the design and economics by means of examples. Benefits and challenges related to thermal hydrolysis are also characterized alongside selected case-studies and ideas for future applications. Dr William (Bill) Barber has had a keen interest in thermal hydrolysis for numerous years and was instrumental in the development of Europe's largest facility as well as advising water utilities, consultants, researchers and government organizations on its potential to modernize wastewater treatment.
Around the world, the production of sewage sludge is increasing. This is due to numerous factors including growing population, increasing urbanization and investments in wastewater infrastructure. In addition, the composition of sewage sludge is evolving because of stricter environmental regulation. Sludge is changing composition towards the production of activated or biological sludge produced during oxidation of wastewater to destroy nutrients, away from primary sludge produced during initial settlement of the incoming solids in wastewater influent. Unfortunately, the processing of activated sludge is notoriously difficult and has been widely lamented by the scientific literature within fifteen years of the commercialization of the activated sludge process in 1914. The principle difference between activated and primary sludge is the high content of extracellular polymer material in activated sludge. This material makes the sludge viscous and difficult to transport. It also retains water which drastically limits the dewaterability potential for the sludge. Additionally, this material makes activated sludge difficult to degrade during anaerobic digestion. As the use of anaerobic digestion of sludge has been growing in interest due to the production of renewable energy amongst other benefits, so has the interest in improving the anaerobic biodegradability of activated sludge, often seen as the rate limiting step in overall digestion performance of municipal sludge. Decades of research have been dedicated to this pursuit investigating a wide variety of methods which have almost exclusively been applied to the sludge prior to anaerobic digestion. Of these methods, thermal hydrolysis, the application of heat in the range of 130°C to 200°C has gained much attention especially since the installation of the first full-scale commercially operating plant in Hias, Norway in 1995. Thermal hydrolysis combined with anaerobic digestion accounts for approximately 60% of all the sludge produced in the UK. Furthermore, it is installed in many major cities worldwide and can be found across 5 continents. The aim of this book is to help the reader gain an understanding of thermal hydrolysis with respect to municipal sludge treatment. It will describe the scientific principles of the process and show how it can influence sludge treatment. The book will present case studies where the technology has been employed and identify the benefits and challenges of the technology.
